Home > News > Interpretation of Core Performance Parameters and Selection Suggestions for Export-oriented Household Small Sunflower Oil Presses

Interpretation of Core Performance Parameters and Selection Suggestions for Export-oriented Household Small Sunflower Oil Presses

QI ' E Group
2025-11-15
Product related content
This article deeply analyzes the key technologies and operation points for improving the oil yield of sunflower seeds in household small sunflower oil presses. It covers aspects such as seed pretreatment, control of pressing temperature and pressure adjustment mechanism. Combining practical operation skills with analysis of common mistakes, it helps users optimize the process flow and stably improve the oil extraction efficiency. Through the combination of theory and practice, it guides household users to operate scientifically, maximize the performance advantages of the equipment, and ensure an efficient, green, and nutritious sunflower oil production experience.
Large screw press

In the realm of home-based cooking and healthy living, a small household sunflower oil press has become an essential tool for many families. However, one common issue that home users often encounter is the unstable oil output. This article aims to delve into the core performance parameters of these small sunflower oil presses and offer practical selection advice to help users enhance the oil extraction rate.

Core Factors Affecting Oil Extraction Rate

Several key factors significantly impact the oil extraction rate of sunflower seeds. Let's take a detailed look at them:

1. Seed Pretreatment

The pretreatment of sunflower seeds, including drying and crushing fineness, plays a crucial role. Properly dried seeds with a moisture content of around 8 - 10% are more conducive to oil extraction. As for crushing, a finer particle size can increase the contact area between the seeds and the press, facilitating the release of oil. For example, if the crushing fineness is too coarse, the oil extraction rate may be reduced by about 10 - 15%.

Sunflower seed pretreatment process

2. Pressing Temperature Control

The pressing temperature is another critical factor. Generally, the optimal pressing temperature for sunflower seeds is between 100 - 120°C. At this temperature range, the oil molecules in the seeds are more active and can be released more easily. If the temperature is too low, the oil viscosity is high, and the oil is difficult to flow out; if the temperature is too high, the oil quality may be affected, and the oil may even produce harmful substances. Research shows that improper temperature control can lead to a 5 - 10% decrease in the oil extraction rate.

3. Pressing Pressure Regulation

Appropriate pressing pressure is also necessary for maximizing oil extraction. A reasonable pressure range ensures that the oil in the seeds can be squeezed out without causing excessive damage to the seeds. Usually, the pressing pressure should be gradually increased during the pressing process. Insufficient pressure may result in an oil extraction rate reduction of about 8 - 12%.

Factor Optimal Range Impact on Oil Extraction Rate (Reduction if not met)
Seed moisture content 8 - 10% 10 - 15%
Pressing temperature 100 - 120°C 5 - 10%
Pressing pressure Gradually increased 8 - 12%

Practical Operation Advice - Three - Step Optimization Plan

To help users improve the oil extraction rate at home, here is a three - step optimization plan:

  1. First, properly pretreat the sunflower seeds. Dry the seeds to the appropriate moisture content and crush them to the right fineness.
  2. Second, set the pressing temperature and pressure according to the optimal range mentioned above. Start the press and adjust the parameters during the process.
  3. Finally, collect the oil and observe the oil output. If there are any problems, adjust the operation steps accordingly.

Common Operation Mistakes and Solutions

There are some common mistakes that home users often make when using small sunflower oil presses. Here are some of them and the corresponding solutions:

Mistake Solution
Not pretreating the seeds properly Follow the correct seed pretreatment process, including drying and crushing.
Incorrect temperature and pressure setting Refer to the optimal temperature and pressure range provided above and adjust accordingly.
Overloading the press Do not put too many seeds into the press at one time. Follow the recommended capacity.

Our small household sunflower oil presses feature mechanical pressing without any chemical additives, ensuring a natural, green, and nutritious oil production experience. With high - stability and efficient performance, our products are supported by professional craftsmanship. To help you better understand the operation, we provide a practical operation video.

We encourage you to leave your questions and comments below. Join our user community and share your experiences. If you want to know more about our products and our excellent after - sales service, please click here.

Name *
Email *
Message*

Recommended Products

Contact us
Contact us
https://shmuker.oss-accelerate.aliyuncs.com/tmp/temporary/60ec5bd7f8d5a86c84ef79f2/60ec5bdcf8d5a86c84ef7a9a/thumb-prev.png